Fim ɗin polyester mai amfani da thermoplastic

Takaitaccen Bayani:

Da Takarda Ko Ba Tare Da Takarda Ba	FAƊI/MM	FAƊI/M/kamar yadda aka tsara	YANKIN NARKUWA	Sana'ar Aiki
				INJI MAI DANNA ZAFI
Ba tare da	0.015~0.35	Ana iya yin 137cm, 150cm, da sauran faɗi don yin oda	40-60℃	100-140℃, 5-12s,0.4Mpa

Aika mana imel

Cikakken Bayani game da Samfurin

Haɗa PVC, fata ta wucin gadi, zane, zare da sauran kayan da ke buƙatar ƙarancin zafin jikisarrafawa.

Riba

1. Ƙarfin lamination mai kyau: idan aka yi amfani da shi a yadi, samfurin zai yi aiki mai kyau na haɗin kai.
2. Ba ya da guba kuma yana da illa ga muhalli: Ba zai fitar da ƙamshi mara daɗi ba kuma ba zai yi mummunan tasiri ga lafiyar ma'aikata ba.
3. Sauƙin amfani: Fim ɗin manne mai zafi zai fi sauƙi a haɗa kayan, kuma yana iya adana lokaci.
4. Tsarin shimfiɗa na al'ada: Yana da shimfiɗa na al'ada, ana iya amfani da shi don haɗa PVC, fata ta wucin gadi, zane, zare da sauran kayan.
5. Saurin lu'ulu'u mai sauri, ƙarancin zafin kunnawa, juriyar wankewa mai kyau, ƙarfi mai kyau.

Babban aikace-aikacen

takalma/yadi lamination

L341B manne ne mai zafi wanda aka yi da TPU wanda ke da manne mai kyau. Ya dace da haɗa PVC, fata ta wucin gadi, zane, zare da sauran kayan da ke buƙatar ƙarancin sarrafa zafin jiki. Aiki:
saurin crystallization mai sauri, ƙarancin zafin kunnawa, juriyar wankewa, ƙarfi mai kyau

Wani aikace-aikacen